Flavor formation of tilapia byproduct hydrolysates in Maillard reaction.

The Maillard reaction (MR) of tilapia byproduct protein hydrolysates was investigated for the use of byproduct protein as a food ingredient and to mask its fishy odor and bitter flavor. The flavor differences in tilapia byproduct hydrolysates before and after the MR were analyzed to explore the key flavor precursor peptides and amino acids involved in MR. The results suggested that eight key volatile substances, including 2,5-dimethylpyrazine, 2-pentylfuran, hexanal, octanal, nonanal, (E)-2-decenal, decanal, and 1-octen-3-ol contributed most to the MR products group (ROAV > 1). Ten volatile compounds, including 1-octen-3-ol, hexanal, 2-pentylfuran, 2,5-dimethylpyrazine, methyl decanoate, and 2-octylfuran, were the flavor markers that distinguished the different samples (VIP > 1). The four most consumed peptides were VAPEEHPTL, GPIGPRGPAG, KSADDIKKAF, and VWEGQNIVK. Umami peptides and bitter free amino acids (FAAs) were the key flavor precursor peptide and FAAs, respectively. Overall, the hydrolysates of tilapia byproducts with flavor improved by MR are a promising strategy for the production of flavorings.

Effect of a collagen peptide-fish oil high internal phase emulsion on the printability and gelation of 3D-printed surimi gel inks.

The effect of a high internal phase emulsion (HIPE) on three-dimensional-printed surimi gel inks was studied. Increasing the concentration of collagen peptide decreased the particle size of HIPE droplets and improved the viscoelasticity and stability. For example, when the collagen peptide concentration was 5 wt%, the viscoelasticity of the HIPE was high, as indicated by the presence of small and uniform particles, which formed a monolayer in the outer layer of the oil droplets to form stable a HIPE. A HIPE was used as the filling material to fill the surimi gel network, which reduced the porosity of the network. Surimi protein and peptides have dual emulsifying effects on the stabilization of oil. After adding the emulsion, the texture, gel properties and rheological properties of the surimi were reduced, and its printing adaptability was improved. This study provides new ideas for the production of surimi and its application in 3D printing.

Regulation of Electronic Structures of the Urchin-Like NiCoP/CoP Nanocatalysts for Fast Hydrogen Evolution.

The exploration of stable, efficient, and low-cost catalysts toward ammonia borane hydrolysis is of vital significance for the practical implementation of this hydrogen production technology. Integrating interface engineering and nano-architecture engineering is a favorable strategy to elevate catalytic performance, as it can modify the electronic structure and provide sufficient active sites simultaneously. In this work, urchin-like NiCoP/CoP heterostructures are prepared via a three-step hydrothermal-oxidation-phosphorization synthesis route. It is demonstrated that the original Ni/Co molar ratio and the amount of phosphorus are crucial for adjusting the morphology, enhancing the exposed surface area, facilitating charge transfer, and modulating the adsorption and activation of H2O molecules. Consequently, the optimal Ni1Co2P heterostructure displays remarkable catalytic properties in the hydrolysis of ammonia borane with a turnover frequency (TOF) value of 30.3 molH2 ⋅ min-1 ⋅ molmetal -1, a low apparent activation energy of 25.89 kJ ⋅ mol-1, and good stability. Furthermore, by combining infrared spectroscopy and isotope kinetics experiments, a possible mechanism for the hydrolysis of ammonia borane was proposed.

Multi-targeting inulin-based nanoparticles with cannabidiol for effective prevention of ulcerative colitis.

The pathogenesis of ulcerative colitis (UC) is closely related to severe inflammation, damaged colonic mucosal barrier, increased oxidative stress and intestinal ecological imbalance. However, due to the nonspecific distribution and poor bioavailability of drugs, UC treatment is still a serious challenge. Here, a mitochondria/colon dual targeted nanoparticles based on redox response was developed to effectively alleviate UC. Cannabidiol nanoparticles (CBD NPs) with a particle size of 143.2 ± 3.11 nm were prepared by self-assembly using polymers (TPP-IN-LA) obtained by modifying inulin with (5-carboxypentyl) triphenyl phosphonium bromide (TPP) and α-lipoic acid (α-LA). Excitingly, the constructed CBD NPs showed excellent mitochondrial targeting, with a Pearson correlation coefficient of 0.76 at 12 h. The results of animal imaging in vivo showed that CBD NPs could be effectively accumulated in colon tissue. Not only that, CBD showed significant glutathione stimulated release in the presence of 10 mM glutathione at pH 7.4. The results of in vivo animal experiments showed that CBD NPs significantly ameliorated DSS-induced colonic inflammation by modulating the TLR4-NF-κB signaling pathway. Moreover, CBD NPs significantly improved the histological damage of colon in UC mice, increased the expression level of tight junction protein ZO-1, and effectively restored the intestinal mucosal barrier function and intestinal mucosal permeability. More importantly, CBD NPs significantly improved the species composition, abundance and amount of short chain fatty acids of intestinal flora in UC mice, thus effectively maintaining the balance of intestinal flora. The dual-targeted and glutathione-responsive nanoparticles prepared in this study provide a promising idea for achieving targeted delivery of CBD for effective treatment of UC.

Heterogeneous Photodegradation Behavior of Liquid Crystal Monomers in Dust: Quantitative Structure-Activity Relationship and Product Identification.

The heterogeneous photodegradation behavior of liquid crystal monomers (LCMs) in standard dust (standard reference material, SRM 2583) and environmental dust was investigated. The measured photodegradation ratios for 23 LCMs in SRM and environmental dust in 12 h were 11.1 ± 1.8 to 23.2 ± 1.1% and 8.7 ± 0.5 to 24.0 ± 2.8%, respectively. The degradation behavior of different LCM compounds varied depending on their structural properties. A quantitative structure-activity relationship model for predicting the degradation ratio of LCMs in SRM dust was established, which revealed that the molecular descriptors related to molecular polarizability, electronegativity, and molecular mass were closely associated with LCMs' photodegradation. The photodegradation products of the LCM compound 4'-propoxy-4-biphenylcarbonitrile (PBIPHCN) in dust, including •OH oxidation, C-O bond cleavage, and ring-opening products, were identified by nontarget analysis, and the corresponding degradation pathways were suggested. Some of the identified products, such as 4'-hydroxyethoxy-4-biphenylcarbonitrile, showed predicted toxicity (with an oral rat lethal dose of 50%) comparable to that of PBIPHCN. The half-lives of the studied LCMs in SRM dust were estimated at 32.2-82.5 h by fitting an exponential decay curve to the observed photodegradation data. The photodegradation mechanisms of LCMs in dust were revealed for the first time, enhancing the understanding of LCMs' environmental behavior and risks.

The tRF-3024b hijacks miR-192-5p to increase BCL-2-mediated resistance to cytotoxic T lymphocytes in Esophageal Squamous Cell Carcinoma.

The limited efficacy of immune checkpoint inhibitors (ICIs) in the treatment of advanced Esophageal Squamous Cell Carcinoma (ESCC) poses a challenge. Recent evidence suggests that tumor cells' insensitivity to cytotoxic T lymphocytes (CTLs) contributes to drug resistance against ICIs. Here, a particular tRNA-derived fragment called tRF-3024b has been identified as playing a significant role in tumor cell resistance to CTLs. Through tRF sequencing (tRF-seq), we observed a high expression of tRF-3024b in ESCC cells that survived co-culture with CTLs. Further in vitro studies demonstrated that tRF-3024b reduced the apoptosis of tumor cells when co-cultured with CTLs. The mechanism behind this resistance involves tRF-3024b promoting the expression of B-cell lymphoma-2 (BCL-2) by sequestering miR-192-5p, a microRNA that would normally inhibit BCL-2 expression. This means that tRF-3024b indirectly enhances the protective effects of BCL-2, reducing apoptosis in tumor cells. Rescue assays confirmed that the suppressive function of tRF-3024b relies on BCL-2. In summary, the tRF-3024b/miR-192-5p/BCL-2 axis sheds light on the crucial role of tRF-3024b in regulating BCL-2 expression. These findings offer valuable insights into strategies to enhance the response of ESCC to CTLs and improve the effectiveness of immunotherapy approaches in treating ESCC.

Enhanced Deep Transfer Learning Model based on Spatial-Temporal driven Scalograms for Precise Decoding of Motor Intent in Stroke Survivors.

Intelligent rehabilitation robotics (RR) have been proposed in recent years to aid post-stroke survivors recover their lost limb functions. However, a large proportion of these robotic systems operate in a passive mode that restricts users to predefined trajectories that rarely align with their intended limb movements, precluding full functional recovery. To address this issue, an efficient Transfer Learning based Convolutional Neural Network (TL-CNN) model is proposed to decode post-stroke patients' motion intentions toward realizing dexterously active robotic training during rehabilitation. For the first time, we use Spatial-Temporal Descriptor based Continuous Wavelet Transform (STD-CWT) as input to TL-CNN to optimally decode limb movement intent patterns. We evaluated the STD-CWT method on three distinct wavelets including the Morse, Amor, and Bump, and compared their decoding outcomes with those of the commonly adopted CWT technique under similar experimental conditions. We then validated the method using electromyogram signals of five stroke survivors who performed twenty-one distinct motor tasks. The results showed that the proposed technique recorded a significantly higher (p<0.05) decoding accuracy and faster convergence compared to the common method. Our method equally recorded obvious class separability for individual motor tasks across subjects. The findings suggest that the STD-CWT Scalograms have the potential for robust decoding of motor intention and could facilitate intuitive and active motor training in stroke RR.Clinical Relevance- The study demonstrated the potential of Spatial Temporal based Scalograms in aiding precise and robust decoding of multi-class motor tasks, upon which dexterously active rehabilitation robotic training for full motor function restoration could be realized.

Analysis of Artifactual Components Rejection Threshold towards Enhanced Characterization of Neural Activity in Post-Stroke Survivor.

Research advancement has spurred the usage of electroencephalography (EEG)-based neural oscillatory rhythms as a biomarker to complement clinical rehabilitation strategies for the recovery of motor functions in stroke survivors. However, the inevitable contamination of EEG signals with artifacts from various sources limits its utilization and effectiveness. Thus, the integration of Independent Component Analysis (ICA) and Independent Component Label (ICLabel) has been widely employed to separate neural activity from artifacts. A crucial step in the ICLabel preprocessing pipeline is the artifactual ICs rejection threshold (TH) parameter, which determines the overall signal's quality. For instance, selecting a high TH will cause many ICs to be rejected, thereby leading to signal over-cleaning, and choosing a low TH may result in under-cleaning of the signal. Toward determining the optimal TH parameter, this study investigates the effect of six different TH groups (NO-TH and TH1-TH6) on EEG signals recorded from post-stroke patients who performed four distinct motor imagery (MI) tasks including wrist and grasping movements. Utilizing the EEG-beta band signal at the brain's sensorimotor cortex, the performance of the TH groups was evaluated using three notable EEG quantifiers. Overall, the obtained result shows that the considered THs will significantly alter neural oscillatory patterns. Comparing the performance of the TH-groups, TH-3 with a confidence level of 60% showed consistently stronger signal desynchronization and lateralization. The correlation result shows that most of the electrode pairs with high correlation values are replicable across all the MI tasks. It also revealed that brain activity correlates linearly with distance, and a strong correlation between electrode pairs is independent of the different brain cortices. The study outcome may facilitate adequate therapeutic intervention for stroke rehab.Clinical Relevance: This study indicated that optimal selection of the ICLabel artifactual rejection threshold is essential for EEG enhancement for adequate signal characterization. Thus, a TH-values with a confidence level between 50% - 70% would be suggested for artifactual ICs rejection in MI-EEG.

Using microneedle array electrodes for non-invasive electrophysiological signal acquisition and sensory feedback evoking.

Introduction: Bidirectional transmission of information is needed to realize a closed-loop human-machine interaction (HMI), where electrophysiological signals are recorded for man-machine control and electrical stimulations are used for machine-man feedback. As a neural interface (NI) connecting man and machine, electrodes play an important role in HMI and their characteristics are critical for information transmission. Methods: In this work, we fabricated a kind of microneedle array electrodes (MAEs) by using a magnetization-induced self-assembly method, where microneedles with a length of 500-600 µm and a tip diameter of ∼20 µm were constructed on flexible substrates. Part of the needle length could penetrate through the subjects' stratum corneum and reach the epidermis, but not touch the dermis, establishing a safe and direct communication pathway between external electrical circuit and internal peripheral nervous system. Results: The MAEs showed significantly lower and more stable electrode-skin interface impedance than the metal-based flat array electrodes (FAEs) in various testing scenarios, demonstrating their promising impedance characteristics. With the stable microneedle structure, MAEs exhibited an average SNR of EMG that is more than 30% higher than FAEs, and a motion-intention classification accuracy that is 10% higher than FAEs. The successful sensation evoking demonstrated the feasibility of the MAE-based electrical stimulation for sensory feedback, where a variety of natural and intuitive feelings were generated in the subjects and thereafter objectively verified through EEG analysis. Discussion: This work confirms the application potential of MAEs working as an effective NI, in both electrophysiological recording and electrical stimulation, which may provide a technique support for the development of HMI.

Activating and optimizing the In-Plane interface of 1 T/2H MoS2 for efficient hydrogen evolution reaction.

Implanting the octahedral phase (1 T) into the hexagonal phase (2H) of the molybdenum disulfide (MoS2) matrix is considered one of the effective methods to enhance hydrogen evolution reaction (HER) performances of MoS2. In this paper, hybrid 1 T/2H MoS2 nanosheets array was successfully grown on conductive carbon cloth (1 T/2H MoS2/CC) via facile hydrothermal method and the 1 T phase content in 1 T/2H MoS2 is regulated to gradually increase from 0 % to 80 %. 1 T/2H MoS2/CC with 75 % 1 T phase content exhibits optimal HER performances. The DFT calculation results show that S atoms in 1 T/2H MoS2 interface exhibit the lowest hydrogen adsorption Gibbs free energies (ΔGH*) compared with other sites. The improvement of HER performances are primarily attributed to activating the in-plane interface regions of the hybrid 1 T/2H MoS2 nanosheets. Furthermore, the relationship between 1 T MoS2 content in 1 T/2H MoS2 and catalytic activity was simulated by a mathematical model, which shows that the catalytic activity presents a trend of increasing and then decreasing with the increase of 1 T phase content.

Serum organophosphate flame retardants and plasticizers in Chinese females of childbearing age: Association with serum reproductive and thyroid hormones.

Organophosphate flame retardants (OPFRs) are extensively used as flame retardants and plasticizers, but their endocrine disrupting potentials have raised concerns. However, the impacts of OPFR exposures on reproductive and thyroid hormones in females remains unclear. In this study, serum concentrations of OPFRs were investigated, and levels of reproductive and thyroid hormones, including follicle-stimulating hormone (FSH), luteinizing hormone (LH), estradiol, anti-Müllerian hormone, prolactin (PRL), testosterone (T), and thyroid stimulating hormone, were analyzed in childbearing-age females undergoing in-vitro fertilization treatment from Tianjin, a coastal city in China (n = 319). Tris (2-chloroethyl) phosphate (TCEP) was the predominant OPFR, with a median concentration of 0.33 ng/mL and a detection frequency of 96.6%. In the whole population, tris(1,3-dichloro-2-propyl) phosphate (TDCIPP) and tris(2-chloroisopropyl) phosphate (TCIPP) were positively associated with T (p < 0.05), while triethyl phosphate (TEP) was negatively associated with LH (p < 0.05) and LH/FSH (p < 0.01). Particularly, TCIPP was negatively associated with PRL in the younger subgroup (age≤30, p < 0.05). Moreover, TCIPP was negatively associated with diagnostic antral follicle counting (AFC) in the mediation analysis by a dominating direct effect (p < 0.01). In conclusion, serum levels of OPFRs were significantly associated with reproductive and thyroid hormone levels and a risk of decreased ovarian reserve in childbearing-age females, with age and body mass index being significant influencing factors.

Dysregulation of steroid metabolome in follicular fluid links phthalate exposure to diminished ovarian reserve of childbearing-age women.

The widespread use of phthalates (PAEs) has drawn increasing attention due to their endocrine disruption and reproductive toxicity, while the steroid metabolome is essential for follicular development. However, the mechanism by which PAE exposure affects ovarian reserve through the steroid metabolome remains unclear. This study recruited 264 childbearing-age women in Tianjin (China) from April 2019 to August 2020 in a cross-sectional design. Target metabolome analysis of 16 steroids was performed in follicular fluid (FF) to compare diminished ovarian reserve (DOR) against normal ovarian reserve (NOR) women and differential steroids were identified using binary logistic analyses. Further analysis of eleven PAE metabolites (mPAEs) in FF was conducted, and the retrieved oocyte number (RON) representing ovarian reserve was counted. Multiple linear regression and quantile-based g-computation (qgcomp) models were used to associate individual mPAEs and mPAE mixture with the DOR-related differential steroids in FF. Mediation analysis was used to discuss the mediating effect of DOR-related steroids on the association between mPAEs and RON. Androstenedione (A4), corticosterone (CORT), cortisol (COR) and cortisone were significantly down-regulated in FF from women with DOR. Nine mPAEs with detection frequencies greater than 60% and median concentrations of 0.02-4.86 ng/mL were incorporated into statistical models. Negative associations with COR and CORT were found for mono-ethyl phthalate (mEP), mono-(2-ethyl-5-oxohexyl) phthalate (mEOHP), and mono-2-ethylhexyl phthalate (mEHP). A positive association with cortisone was found for mEOHP, mEHP, monobutyl phthalate (mBP), and mono (2-isobutyl) phthalate (miBP). The qgcomp and mediation analyses revealed that mEP and mEOHP not only significantly contributed to the decline of COR and CORT in the mixed exposure but also indirectly reduced RON through the mediating effects of COR and CORT. In conclusion, PAE exposure may decrease ovarian reserve by downregulating COR and CORT.

Ascertaining the optimal myoelectric signal recording duration for pattern recognition based prostheses control.

Introduction: Electromyogram-based pattern recognition (EMG-PR) has been widely considered an essentially intuitive control method for multifunctional upper limb prostheses. A crucial aspect of the scheme is the EMG signal recording duration (SRD) from which requisite motor tasks are characterized per time, impacting the system's overall performance. For instance, lengthy SRD inevitably introduces fatigue (that alters the muscle contraction patterns of specific limb motions) and may incur high computational costs in building the motion intent decoder, resulting in inadequate prosthetic control and controller delay in practical usage. Conversely, relatively shorter SRD may lead to reduced data collection durations that, among other advantages, allow for more convenient prosthesis recalibration protocols. Therefore, determining the optimal SRD required to characterize limb motion intents adequately that will aid intuitive PR-based control remains an open research question. Method: This study systematically investigated the impact and generalizability of varying lengths of myoelectric SRD on the characterization of multiple classes of finger gestures. The investigation involved characterizing fifteen classes of finger gestures performed by eight normally limb subjects using various groups of EMG SRD including 1, 5, 10, 15, and 20 s. Two different training strategies including Between SRD and Within-SRD were implemented across three popular machine learning classifiers and three time-domain features to investigate the impact of SRD on EMG-PR motion intent decoder. Result: The between-SRD strategy results which is a reflection of the practical scenario showed that an SRD greater than 5 s but less than or equal to 10 s (>5 and < = 10 s) would be required to achieve decent average finger gesture decoding accuracy for all feature-classifier combinations. Notably, lengthier SRD would incur more acquisition and implementation time and vice-versa. In inclusion, the study's findings provide insight and guidance into selecting appropriate SRD that would aid inadequate characterization of multiple classes of limb motion tasks in PR-based control schemes for multifunctional prostheses.

Multiple metal exposure and metabolic syndrome in elderly individuals: A case-control study in an active mining district, Northwest China.

The prevalence of metabolic syndrome (MetS) is increasing at an alarming rate worldwide, particularly among elderly individuals. Exposure to various metals has been linked to the development of MetS. However, limited studies have focused attention on the elderly population living in active mining districts. Participants with MetS (N = 292) were matched for age (±2 years old) and sex with a healthy subject (N = 292). We measured the serum levels of 14 metals in older people aged 65-85 years. Conditional logistic regression, restricted cubic spline model, multiple linear regression, and Bayesian Kernel Machine Regression (BKMR) were applied to estimate potential associations between multiple metals and the risk of MetS. Serum levels of Sb and Fe were significantly higher than the controls (0.58 µg/L vs 0.46 µg/L, 2167 µg/L vs 2042 µg/L, p < 0.05), while Mg was significantly lower (20035 µg/L vs 20,394 µg/L, p < 0.05). An increased risk of MetS was associated with higher serum Sb levels (adjusted odds ratio (OR) = 1.61 for the highest tertile vs. the lowest tertile, 95% CI = 1.08-2.40, p-trend = 0.018) and serum Fe levels (adjusted OR = 1.55 for the highest tertile, 95% CI = 1.04-2.33, p-trend = 0.032). Higher Mg levels in serum may have potential protective effects on the development of MetS (adjusted OR = 0.61 for the highest tertile, 95% CI = 0.41-0.91, p-trend = 0.013). A joint exposure analysis by the BKMR model revealed that the mixture of 12 metals (except Tl and Cd) was associated with increased risk of MetS. Our results indicated that exposure to Sb and Fe might increase the risk of MetS in an elderly population living in mining-intensive areas. Further work is needed to confirm the protective effect of Mg on MetS.

The synergistic action of two chitinases from Vibrio harveyi on chitin degradation.

In this study, two chitinases (VhChit2 and VhChit6) from Vibrio harveyi possessed specific activity of 36.5 and 20.8 U/mg, respectively. Structure analysis indicates that their amino acid composition of active sites is similar, but the substrate binding cleft of VhChit2 is deeper than that of VhChit6. They were shown to have a synergistic effect on chitin degradation, and the optimized degree of synergy and the degradation ratio of chitin reached 1.75 and 23.6 %, respectively. The saturated adsorption capacity of VhChit2 and VhChit6 adsorbed in 1 g of chitin was 48.5 and 33.4 mg. It was found that VhChit2 and VhChit6 had different adsorption sites on chitin, making more enzymes absorbed by chitin. Furthermore, the combined use of VhChit2 and VhChit6 increased their binding force of chitinases with the substrate. The synergistic action of VhChit2 and VhChit6 may be attributed to their different adsorption sites on chitin and the increased binding force with chitin.

Organophosphite Antioxidants and Novel Organophosphate Esters in Dust from China: Large-Scale Distribution and Heterogeneous Phototransformation.

A large-scale survey was conducted by measuring five organophosphite antioxidants (OPAs) and three novel organophosphate esters (NOPEs) in 139 dust samples across China. The median summed concentrations of OPAs and NOPEs in outdoor dust were 33.8 ng/g (range: 0.12-53,400 ng/g) and 7990 ng/g (2390-27,600 ng/g), respectively. The dust concentrations of OPAs associated with the increasing economic development and population density from western to eastern China, whereas the NOPE concentration in Northeast China (median, 11,900 ng/g; range, 4360-16,400 ng/g) was the highest. Geographically, the distribution of NOPEs was significantly associated with annual sunshine duration and precipitation at each sampling site. Results of laboratory experiments further revealed that the simulated sunlight irradiation promoted the heterogeneous phototransformation of OPAs in dust, and this process was accelerated with the existence of reactive oxygen species and enhanced relative humidity. Importantly, during this phototransformation, the hydroxylated, hydrolyzed, dealkylated, and methylated products, e.g., bis(2,4-di-tert-butylphenyl) methyl phosphate, were identified by nontargeted analysis, part of which were estimated to be more toxic than their parent compounds. The heterogeneous phototransformation pathway of OPAs was suggested accordingly. For the first time, the large-scale distribution of OPAs and NOPEs and the phototransformation of these "new chemicals" in dust were revealed.

Effects of different drying temperatures on the profile and sources of flavor in semi-dried golden pompano (Trachinotus ovatus).

Drying is an important process that can impart a different flavor to dried fish. The differences and sources of flavor of semi-dried golden pompano at different drying temperatures (40, 48, and 56 °C) were investigated, and the sensory quality, flavor substances, nonenzymatic reactions, and protein degradation were analyzed. Significant flavor differences were observed among different drying temperatures (P < 0.05), with several sensory properties showing superior results in the 40 °C group. Thirteen volatile compounds that contributed to the overall aroma were screened according to the relative odor activity value. Glu (umami taste) and Ala (sweet taste) were identified as key flavor substances based on the taste activity value. Nonanal, hexanal, heptanal, acetoin, pentadecane, and octanal represented the flavor markers. The flavor sources at higher drying temperatures included the joint action of lipid oxidation and the Maillard reaction, while those at lower temperature were lipid oxidation and protein degradation, which increased the aldehyde and free amino acid levels in the product, thus leading to the best flavor.

Stereoscopic projection lithography based 3D printing with high precision for advanced tissue engineering application.

The emergence of tissue engineering technology provides an option for the treatment of early organ and tissue lesions by combination of biomimetic scaffolds and stem cells. Stereoscopic projection lithography is utilized broadly in varied application areas due to its high-precision, resolution, and efficiency features. It can be used to fabricate and manufacture complex scaffolds with hierarchical construct, which are highly suitable for advanced tissue engineering application. In current work, gelatin methacrylate (GelMA) was synthesized and fabricated to bioactive scaffold because of its excellent biocompatibility and biodegradability by using stereoscopic projection lithography based 3D printer (YC-M3D-10). The scaffold displayed multilayered micro structures that supported stem cell growth and promoted cell proliferation. The results demonstrated that the cells proliferated significantly on the printed GelMA scaffold after 6 days. Moreover, GelMA scaffolds can promote cell proliferation and show great prospects in future tissue engineering applications.

Different responses to joint exposure to cadmium and zinc depends on the sex in Populus cathayana.

The alarming increase in soil contamination by heavy metals, such as cadmium and zinc demands immediate attention. The dioecious tree Populus cathayana, a phytoremediation plant, plays an important role in rehabilitating heavy metal contaminated areas. In this study, male and female P. cathayana plants were treated with Cd (20 mg kg-1) and different levels of Zn (25, 50, or 100 mg kg-1) to study their physiological responses. The results showed that Cd exposure alone caused stress by inhibiting the growth of both male and female plants. In both males and females, photosynthesis and antioxidant enzymes activities decreased substantially under Cd stress alone. Cd was largely located in the roots, but Zn was present in the shoots of both sexes. Zn supplementation considerably increased the photosynthetic rate from 14.62 % to 60.45 % and also enhanced the antioxidant enzymes activities from 24.11 % to 86.21 %. Zn treatment decreased the translocation ability of Cd compared to the Cd-only treatment, alleviating Cd toxicity. In addition, when sufficient Zn was made available, males showed a high degree of Cd accumulation, low root-to-shoot translocation, elevated antioxidant defense abilities, and an increased photosynthetic rate, while females were less responsive to Cd stress than males. Thus, combined exposure to Cd and Zn caused differential responses in plant growth and physiological processes between males and females P. cathayana. Male plants exhibit better Cd tolerance and accumulation capacity under optimum Zn supplementation. This study increases the fundamental knowledge regarding P. cathayana plants, which can be applied to enhance their remediation capacity in Cd-contaminated soils.

An artificial remote tactile device with 3D depth-of-field sensation.

Flexible tactile neuromorphic devices are becoming important as the impetus for the development of human-machine collaboration. However, accomplishing and further transcending human intelligence with artificial intelligence still confront many barriers. Here, we present a self-powered stretchable three-dimensional remote tactile device (3D-RTD) that performs the depth-of-field (DOF) sensation of external mechanical motions through a conductive-dielectric heterogeneous structure. The device can build a logic relationship precisely between DOF motions of an external active object and sensory potential signals of bipolar sign, frequency, amplitude, etc. The sensory mechanism is revealed on the basis of the electrostatic theory and multiphysics modeling, and the performance is verified via an artificial-biological hybrid system with micro/macroscale interaction. The feasibility of the 3D-RTD as an obstacle-avoidance patch for the blind is systematically demonstrated with a rat. This work paves the way for multimodal neuromorphic device that transcends the function of a biological one toward a new modality for brain-like intelligence.